Research, Innovation & Scholarly Output

Research Publications

Explore research publications and intellectual-property outputs recorded at Stella Mary's College of Engineering, Kanyakumari, including faculty journal publications, conference papers and patents. The records are presented directly from the institutional research database.

Institutional Research Output

Journal Articles, Conference Papers & Patents

The Research Publications repository presents scholarly outputs recorded through the institutional research documentation system. Faculty publication records include national and international journal articles, conference publications and patents. Publication information is displayed directly from the database and organised into searchable categories with paginated records for easier navigation.

226 Faculty Journal Records
195 Conference Records
84 Patent Records
505 Recorded Faculty Outputs

Research Publication Database

Select a category to view institutional publication and patent records.

Records shown below are rendered directly from the institutional database. Each section displays up to 50 records per page for faster loading and easier browsing.

# Publication Details
151 V. Kalpana, S. Shanthi, A. Sagai Francis Britto, N. B. Prakash , IoT based Smart Traffic Control Signal Using Solar Energy, Journal of Computational and Theoretical Nanoscience, Vol: 17, Issue: 12, ISSN: 5334-5338, December, 2020
152 Ajith, S., Sivapragasam, C., , Safety and Hazards Management in Construction Sites – A Review, Journal of Technology, Vol: 35, Issue: 3, ISSN: 1012-3407, November, 2020
153 A. Sagai Francis Britto, R. EdwinRaj, M. CarolinMabel, Design of bonding process parameters for experimentation and ANN-GA model development to maximize diffusion bond strength, International Journal of Computational Materials Science and Surface Engineering, Vol: 9, Issue: 3, ISSN: 1753-3473, November, 2020
154 C. Saravana Murthi, C. R. Rathish, J. Indirapriyadharshini, Deepak V, A. Sagai Francis Britto, A Novel and Effective Method for Automatic Paper Trimming and Cutting process in Paper Industries, International Journal of Advanced Science and Technology, Vol: 29, Issue: 6, ISSN: 2005-4238, November, 2020
155 E. Punarselvam, T. Kalavathidevi, A Sagai Francis Britto, N.B Prakash, P. Suresh , Segmentation analysis techniques and identifying stress ratio of human lumbar spine using Ansys, Journal of Medical Imaging and Health Informatics, Vol: 10, Issue: 10, ISSN: 2156-7018, October, 2020
156 Jasmine .J,M.E.Shajini Sheeba, Characteristics of Single Electron Transistor: A comparison of Carbon Nanotube with Slicon based quantum dot, ISSN 2515-8260 Volume 7, Issue 4, 2020, Vol: 7, Issue: 4, September, 2020
157 A. Annie Lydia, M.K.Angel Jebitha, OPERATIONS ON SOME STAR RELATED PERFECT MEAN CORAL GRAPHS, Advances in Mathematics: Scientific Journal, Vol: 6, Issue: 2020, ISSN: 1857-8365, September, 2020
158 Vigneshwaran, S., Sundarakannan, R., John, K. M., Johnson, R. D. J., Prasath, K. A., Ajith, S., , Recent advancement in the natural fiber polymer composites: A comprehensive review., Journal of Cleaner Production, Vol: 277, Issue: 124109, ISSN: 0959-6526, July, 2020
159 P. MONIVARMAN, V.A. NAGARAJAN, and F. MICHAEL RAJ , Mechanical and morphological characterization of discarded fishnet/glass fiber reinforced polyester composite, MATERIAL SCIENCE AND NANOTECHNOLOGY, Vol: 68, Issue: 6, ISSN: 2300-1917, July, 2020
160 8. D. Palanisamy, A. Sagai Francis Britto, J. S. Binoj, N. Manikandan, Statistical Optimization of Parameters for Enhanced Properties of Diffusion Bonded AA6061 and AA 7075 Aluminium Alloys, Materials Today: Proceedings, Vol: 39, Issue: 1, ISSN: 2214-7853, July, 2020
161 A B Evanjalin, Smart Electric Bell Using Atmel Microcontroller, purakala, Vol: 31, Issue: 8, ISSN: 0971 2143, April, 2020
162 Michael Raj. F, Abdul Basith. M, Abiram.B.S, Bala Williams. M, Sahaya Elsi. S, A Bluetooth Technology Based Combined Cycle of Desalination and Rainwater Collector for Coastal Hamlets, IEEE, April, 2020
163 Sahaya Elsi.S, Michael Raj.F, Prince Mary.S, Freeda.S, C. M. G Jersy, A Novel Safety Alert System for Small Scale Fishing Crafts, GEDRAG , Vol: 33, Issue: 02, ISSN: 0921-5077, February, 2020
164 Sahaya Elsi.S, Michael Raj.F, Prince Mary.S, Freeda.S, C. M. G Jersy, Artificial Neural Network Analysis of Custom Power Devices for Mitigates the Problem of Power Failures, GEDRAG , Vol: 33, Issue: 2, ISSN: 0921-5077, February, 2020
165 R.Raj kumar, N.Gnana Prasanna, F.Michael Raj, Experimental Investigation of Wire EDM Process Parameters on SiC Particles Reinforced AA6063 (Black , Tierärztliche Praxis, Vol: 40, Issue: 2, ISSN: 0303-6286, February, 2020
166 Sahaya Elsi.S, Michael Raj.F, Prince Mary.S, Amala Mithin Minther Singh.A and Jayaram.R.S, MANUFACTURING AND CHARACTERIZATION OF GLASS FIBER-FISHNET-WOVEN ROVING AND POLYESTER COMPOSITES FOR MARINE APPLICATIONS, Journal of Marine Science and Technology, Vol: 28, Issue: 1, ISSN: 1023-2796, January, 2020
167 Ajith, S., Sivapragasam, C., , Safety Assessment and Risk Management in Indian Building Construction Sites., International Journal of Recent Technology and Engineering, Vol: 8, Issue: 4, ISSN: 2277-3878, December, 2019
168 Ajith, S., Sivapragasam, C., , Influence of Human Factors in Indian Building Construction Sites, International Journal of Recent Technology and Engineering, Vol: 8, Issue: 4, ISSN: 2277-3878, December, 2019
169 Ajith, S., Sivapragasam, C., , Mechanical Properties of Fiber Reinforced Polymer Composites, International Journal of Recent Technology and Engineering, Vol: 8, Issue: 4, ISSN: 2277-3878, December, 2019
170 EZHIL VIGNESH. K1 , STEPHY AKKARA2 , SIMULATION ON THE GENERATION OF ELECTRICITY FROM RUNNING TRAIN WHEELS , International Journal of Mechanical and Production Engineering Research and Development, Vol: 09, ISSN: 2249-6890 , August, 2019
171 S.S. Sreeja Mole,K. Sujatha., An efficient Gait Dynamics classification method for Neurodegenerative Diseases using Brain signals, 245, Vol: 43, Issue: 8, June, 2019
172 R.Rajkumar, N.Gnana Prasanna, F.Michael Raj, Influence of Processing Parameters on AA 6063/SiC (Black , Caribbean Journal of Science, Vol: 53, Issue: 2, ISSN: 0008-6452, May, 2019
173 Jenix Rino J, Balasivanandha Prabu S, Thermal stability of ultrafine grained AA8090 Al–Li alloy processed by repetitive corrugation and straightening, Journal of Materials Research and Technology, Vol: 8, Issue: 3, ISSN: 2238-7854, May, 2019
174 Eveline Pregitha R, Ebbie Selvakumar C, ARTIFICIAL NEURAL NETWORK BASED POWER QUALITY ENHANCEMENT OF DOUDLY FED INDUCTION GENERATOR USED WIND ENERGY CONVERSION SYSTEM , INTERNATIONAL JOURNAL OF INFORMATION AND COMPUTING SCIENCE, Vol: 6, Issue: 5, ISSN: 0972-1347, May, 2019
175 Ajith, S., Sivapragasam, C., , Quantification of risk and assessment of key safety factors for safe workplace in Indian building construction sites., Asian Journal of Civil Engineering, Vol: 20, Issue: 5, ISSN: 1563-0854, February, 2019
176 Ajith, S., Sivapragasam, C., , A review on hazards and their consequences in firework industries, SN Applied Sciences, Vol: 1, Issue: 1, ISSN: 25233971, December, 2018
177 A. Amala Mithin Minther Singh, F. Michael Raj, P. Arul Franco, J.S. Binoj, Evaluation of mechanical behavior of multifilament discarded fishnet/glass fiber and polyester composites for marine applications, Marine Structures, Vol: 58, Issue: 1, ISSN: 0951-8339, November, 2018
178 Prabhu, S. R. Boselin; Puviarasi, R.; Mole, S. S. Sreeja; Jarin, T.; Gajendran, E., Evaluation Strategies for Wireless Ultra Wideband Communication Towards Orthopedic Surgical Scheme, American Scientific Publishers, Vol: 8, Issue: 9, ISSN: 2227-7102, November, 2018
179 Pon.Partheeban, V. Kavitha, Versatile Provisioning and Workflow Scheduling in WaaS under Cost and Deadline Constraints for Cloud Computing, Transactions on Emerging Telecommunications Technologies, Vol: 30, Issue: 1, October, 2018
180 R.K. Madhumathi, Ilamparuthi, Laboratory Study on Response of Single Pile Adjacent to Supported Cut, Geotechnical and Geological Engineering, Vol: 36, Issue: 3, ISSN: 09603182, October, 2018
181 D.M. Mary synthia regis prabha , Cuttle Fish Optimization Control of Solar PV array fed Landsman Converter, Journal of Pharmaceutical Research, Issue: 4, August, 2018
182 D.M. Mary synthia regis prabha , Crow Search optimized control of photovoltaic array fed Landsman Converter for industrial applications, International Journal of Pure , Vol: 118, Issue: 4, ISSN: , August, 2018
183 Pon.Partheeban, V. Kavitha, Versatile provisioning and workflow scheduling in WaaS under cost and deadline constraints for cloud computing.pdf, Trans Emerging Tel Tech, Vol: 1, Issue: 1, ISSN: e3527, June, 2018
184 J Jenix Rino, I Jayaram Krishnan, S Balasivanandha Prabu, KA Padmanabhan, Influence of velocity of pressing in RCS processed AA8090 Al-Li alloy, Materials characterization, Vol: 148, ISSN: 1044-5803, June, 2018
185 F. Michael Raj, V.A. Nagarajan,S. SahayaElsi, Waste to Poles: Discarded Fishnet/Glass Fiber and Polyester for Building Electrical Poles, POLYMER COMPOSITES, Vol: 1, Issue: 5, ISSN: 0272-8397, May, 2018
186 A. Sagai Francis Britto, R. Edwin Raj, M. Carolin Mabel, Prediction and optimization of mechanical strength of diffusion bonds using integrated ANN-GA approach with process variables and metallographic characteristics, Journal of Manufacturing Processes, Vol: 32, Issue: 1, ISSN: 2212-4616, April, 2018
187 K. P. Vinod Kumar, F. Michael Raj, S. Sahaya Elsi , Hybrid composites with discarded fishnet and polyester: a novel boat-building material, Ships and Offshore Structures, Vol: 3, Issue: 1, ISSN: 1744-5302, March, 2018
188 Eveline Pregitha R, Ebbie Selvakumar C, Fuzzy Logic Controller Based Power Quality Improvement of Doubly Fed Induction Generator Wind Energy Conversion System, International Journal for Innovative Research in Science , Vol: 4, Issue: 10, ISSN: 2349-6010 , March, 2018
189 Rakhesh I P, Rajkumar S R, Experimental Comparison of Yield of Bio-Oil in Fixed Bed Pyrolyzer, , Vol: 2, Issue: 2, ISSN: , February, 2018
190 M. Vijila Thanga Malar, Baroque Fantasy of Life and Existential Agonies - A study of Jamaica Kincaid’s See Now Then., The Daffodils- An International Journal of English Literature, Language and Criticism, vol.1(1)., Vol: 1, Issue: 2, ISSN: 2394-305X, December, 2017
191 A. Sagai Francis Britto, R. Edwin Raj, M. Carolin Mabel, Prediction of shear and tensile strength of the diffusion bonded AA5083 and AA7075 aluminium alloy using ANN , Materials Science and Engineering: A, Vol: 692, Issue: 1, ISSN: 1873-4936, October, 2017
192 Jenix Rino J*, Balasivanandha Prabu S, Padmanabhan K. A , On the influence of repetitive corrugation and straightening on the microstructure and mechanical properties of AA 8090 Al-Li alloy, Archieves of Civil and Mechanical Engineering, Vol: 18, ISSN: 2083-3318, July, 2017
193 Michael Raj F, V.A. Nagarajan and S. SahayaElsi, INDIAN JOURNAL OF ECOLOGY, Indian Journal of Ecology , Vol: 44, Issue: 2, ISSN: 0304-5250, June, 2017
194 J Jenix Rino, S Balasivanandha Prabu, R Paskaramoorthy, null, Materials Today: Proceedings, Vol: 4, Issue: 8, ISSN: 2214-7853, March, 2017
195 V. G. Anisha Gnana Vincy,T. Karthija, G. Annie Poornima Princess, Cloud Computing and its Security Threats: An Overview, International Research Journal in Global Engineering and Sciences. (IRJGES), Vol: 1, Issue: 4, ISSN: 2456-172X | , January, 2017
196 F. Michael Raj, V.A. Nagarajan, S. Sahaya Elsi and R.S. Jayaram , Effect of fiber content on flexural properties of fishnet/GFRP hybrid composites, Steel and Composite Structures, Vol: 22, Issue: 1, ISSN: 1229-9367 , September, 2016
197 F. Michael Raj, V. A. Nagarajan , Mechanical, physical and dynamical properties of glass fiber and waste fishnet hybrid composites, Polymer Bulletin, Vol: 16082016, Issue: 8, ISSN: 0170-0839, August, 2016
198 A. Angel Sneha, Prediction of Breast Cancer using advanced Genome , IJETCSE, June, 2016
199 C.Arron mesi,V.Gopika vijayan,p.libinrose, muthu, Utilising Hadoop based distribution file system for relational data base, Utilising Hadoop based distribution file system for relational database , May, 2016
200 M. Vijila Thanga Malar, Tracing Bildungroman and Autobiographical Overtones- A Study on Annie John by Jamaica Kincaid., The Daffodils- An International Journal of English Literature, Language and Criticism, vol.1(1)., Vol: 1, Issue: 1, ISSN: 2394-305X, December, 2015

# Conference Publication Details
1 F. Michael Raj, A.S. Leo Watson, M. Francis Ragul, Mohammed Arief khan, Eco-friendly GPS and GSM enabled lifejackets using PET bottles for safety, International Conference, International Conference on sustainable aspects in engineering, technology, Management and science, Udaya School of Engineering, Ammandivilai, April 2026
2 Sony P, Allen Ashima Roy A, Alterin Rishi A, Anish Kumar S, Spatiotemporal Mapping and Analysis of Coastal Eroosion of Manakudy and Vaniyakudi Beach using Historical Imagery from Google Earth Pro, International Conference, 5th International Conference on Advances in Sustainability of Materials and Environment (ICASME'25), St. Xavier's Catholic College of Engineering, May 2025
3 Ms. Lalitha.V.C and Dr. G. Arumugasamy, SUSTAINABLE FINANCE MODELS FOR SOCIAL ENTREPRENEURSHIP VENTURES, International Conference, INTERNATIONAL CONFERENCE PROCEEDINGS ON MULTIDISCIPLINARY RESEARCH ON INTEGRATING KNOWLEDGE FOR SUSTAINABLE FUTURE IN GLOBAL OUTLOOK, Multi Spectrum Rural Skill Development and Educational Trust Kanyakumari, Tamilnadu,India, October 2024
4 Mr. Magesh, Emerging Trends and Challenges in Renewable Energy Sytem, National Workshop, Renewable Energy Sytem, GATES, February 2024
5 , Research Proposal Schemes and Thrust Areas for Engineering and Science Departments, National Workshop, R , StellaMarys College of Engineering, January 2024
6 Lalitha V C , The Role of AI in Talent Acquisition, International Conference, INTERNATIONAL CONFERENCE PROCEEDINGS ON MULTIDISCIPLINARY PERSPECTIVE OF FUTURISTIC RESEARCH AND INNOVATION IN NEW ERA, Arunachala College of Engineering, December 2023
7 Nagesh Singh, Building Advanced Data Analytics Application with Cloud, National Workshop, Next Gen Employability Program, Edunet Foundation, December 2023
8 N Agnes Flora, T Ragin, P Kanmani, P Anitha, M Bavithra, J S Jenisha, Experimental Investigation on Effect of Partial Replacement of Marine Fouling in Concrete, International Conference, International conference, STELLA MARY’S COLLEGE OF ENGINEERING Approved by AICTE, New Delhi, Affiliated to Anna University, Chennai, Accredited by NAAC and Accredited by NBA (MECH , December 2023
9 Lalitha V C and Joseph Rupert , Effective Recruitment Process and Organizational Performance - An Analysis, International Conference, International Conference on Business sustainability in Digitalization Industry 5.0, St.Xaviers College, Palayamkottai , December 2023
10 GUVI, Application of Generative AI, National Workshop, Naan Mudhalvan, St.Xaviers Catholic College of Engineering, November 2023
11 K.Gopal RAM, Enhancing Irrigation Efficiency with AI-Based Instinctive Irrigation System (IIS) in Wireless Sensor Networks, International Conference, System, Computation, Automation and Networking (ICSCAN), 2023 International Conference , November 2023
12 T.Ragin,N.Agnes Flora , Experimental study on the utilization of waste plastic and its compressive strength on concrete in paver blocks, National Conference, NATIONAL CONFERENCE PROCEEDINGS ON MULTIDISCIPLINARY RESEARCH PERSPECTIVE AND TECHNOLOGICAL ADVANCEMENTS IN DIGITAL INDIA, ARUNACHALA College of Engineering for Women Manavilai,Kanyakumari District,Tamilnadu,India www.arunachalacollege.com, October 2023
13 j stanly selva kumar, ANN controller for mitigation of Power Quality issues using single phase unified Power flow controller, International Conference, 2023 International Conference on Circuit Power and Computing Technologies(ICCPCT), VIT UNIVERSITY-CHENNAI, September 2023
14 I.Sabareesa Priya, Optimization Enhancement of Output Voltage for PV System with 9 level Inverter, International Conference, 2023 International Conference on Circuit Power and Computing Technologies(ICCPCT), kanyakumari, August 2023
15 G.Jeyaram, V.Vidhya, M.Madeshwaran,R.Shirley Jeeva Malar, A Hybrid Machine Learning Model for Position Falsification Attacks for Intrusion Detection in VANET, International Conference, Artificial intelligence and Digital Twin Technology (IconAIDTT 2023) , P.S.R Engineering College, Sivakasi., April 2023
16 Eveline Pregitha R, Spatial Fuzzy C-Mean Clustering Method for the Segmentation of Ultrasound Foetal Images, International Conference, Frontiers of Intelligent Computing: Theory and Applications, Cardiff School of Technologies, Cardiff, UK, April 2023
17 Pavithra G, Kevin.M, John bestas Y, Kameshkumar S, Sagai Francis Britto A, Optimization of Stirring Process Parameters for the Production of Aluminum Matrix Composites, International Conference, International Conference on Advances in Materials, Computing and Communication Technologies, Kanyakumari, June 2022
18 R.S Krishna Kumar, G.Jeril Asir, A.Sagai Francis Britto, Mechanical And Metallographic Characteristics of Aa6061/AA7075 Aluminium Alloy Diffusion Bonded Joints, International Conference, International Conference on Advances in Materials, Computing and Communication Technologies, Kanyakumari, June 2022
19 M.Anugraha, S.H.Krishnaveni, A Recent Survey on Issues in Efficient Trust Management in Mobile Adhoc Networks, International Conference, International Conference On Computational Intelligence And Theoretical Sciences(ICCITS- 2020), Chukankadai, February 2020
20 M.Anugraha, S.H.Krishnaveni, A Secured Data Distribution using Hybrid Trust based Mutiple Routing in Mobile Ad-hoc Network, International Conference, International Conference On Computational Intelligence And Theoretical Sciences(ICCITS- 2020), Chukankadai, February 2020
21 A B Evanjalin, Deciphering Internet of Things, National Workshop, Workshop, Riyasaa Labs,nagercoil, August 2019
22 Arun V Rejus Kumar, Sagai Francis Britto A, Design and Fabrication of Automatic Flying Camera, National Conference, National Conference on Recent Advancements in Material Science , Chennai, May 2019
23 K.Gopal RAM, QoS Over Secured MANET, International Conference, National Conference on Innovative Computing Science and Engineering, May 2019
24 Sherlin Sofie S, Suba K V, Subha S , Preserving Privacy in VANET, International Conference, International Conference on Recent Innovation in Computer and Communication , Rohini College of Engineering and Technology , March 2019
25 Prof. Adrew Thangaraj, NPTEL Workshop, National Workshop, NPTEL, Annai Velankanni College of Engineering, June 2016
26 Partheeban, Kumar A, GENERATING DYNAMIC KEY DEPENDENT S-BOX IN AES BLOCK CIPHER SYSTEM, International Conference, ICKCT’16, KCG College of Technology, February 2016
27 Partheeban, DECOUPLING CONSISTENT HASHING FROM RANDOMIZED ALRORITHMS IN a* SEARCH, International Conference, ICKCT’16, KCG College of Technology, February 2016
28 Partheeban, GENERATION OF KEY DEPENDENT AES S-BOX WHICH WITHSTANDS SQUARE ATTACK, International Conference, 4th international conference on Advances in computer, communication and management, PSG College of Technology, Coimbatore, October 2013
29 Partheeban, GENERATION OF DYNAMIC S-BOX USING IRREDUCEABLE POLYNOMIAL AND THE SECRET KEY USED, International Conference, EMICS-13, Maria College of Engineering, September 2013
30 MADHUMATHI and ILAMPARUTHI, RESPONSE OF PILE AND PILE GROUPS AGAINST EXCAVATION INDUCED GROUND MOVEMENT, International Conference, 38th CONFERENCE ON DEEP FOUNDATIONS, USA, May 2013
31 MADHUMATHI and ILAMPARUTHI , EFFECT OF GROUND MOVEMENT ON THE PERFORMANCE OF PILE FOUNDATION, International Conference, Indian Geotechnical Conference, GUNTUR, Andhra, May 2009
32 M.Jasmine Mary, Supervising Secret key Agreements in a Level Based Hierarchy , National Level Symposium, BRIGITZ- Guruzethra'07, St. Xaviers Catholic College of Engineering, March 2007
33 Jasmine Mary. M,MR. R. P Anto Kumar, F.Samy, Supervising Secret key Agreement in a Level Based Hierarchy, National Conference, National Conference on Advances in computer Communication and Instrumentation System, St. Xaviers Catholic College of Engineering, March 2007
34 Divisional Engineer, BSNL, National Workshop, BSNL Training, Nagercoil, June 2006
35 M.Jasmine Mary, Mr. K.N. Siva Balan, An Authentication and key Agreement of Secured Communication, National Conference, Recent Trends in Computing Technologies, Scan College of Engineering and Technology, April 200
36 Mrs.Subitha.V,Dr.M.Supriya,Mrs.J.Sunanthini, Advanced and secure biometric voting system, International Conference, International Conference on scientific innovations in science, Technology and Management", Stella Mary's College of Engineering, August 20
37 M.Jasmine Mary, An Authentication and key Agreement of Secured Communication, National Conference, Advancements Applications in Networking and Computing Techniques, Syed Ammal Engineering College, April 20
38 M.Jasmine Mary, A Wireless charging Vehicle Velocity Control of Optimum path in Wireless Rechargeable Sensor, International Conference, Advanced Innovation in Engineering and Technology 2017, Rohini College of Engineering, February 20
39 M.Anugraha, S.H.Krishnaveni, Recent survey on efficient trust management in mobile adhoc networks, International Conference, IEEE conf on International conference on Circuit, Power and Computing Technologies (ICCPCT), Nagercoil
40 M.Anugraha A.Anitha, J.Jayakumari, Throughput optimization using cross layer flow- based framework in cooperative wireless multihop networks, International Conference, IEEE conf on Global Conferenceon CommunicationTechnologies(GCCT), Thuckalay
41 Dr. A. Gnana Saravanan, T.Kailash Kumar, Mr. J. Daniel Sathyaraj, Mr. N.V. Selvam, J. Raj Kumar, Mrs. S. Chithra, Luo Converter Based Microgrid System With Intelligent Neuro Fuzzy Controller, International Conference, , FRANCIS XAVIER ENGINEERING COLLEGE
42 A. D. J. Raju, S. S. Manohar and A. A. S. Beula, A Behavior Modelling and Analysis of Lithium Ion Battery, International Conference, 2023 2nd International Conference for Innovation in Technology (INOCON), , Bangalore, India
43 • G.Glan Devadhas,D.M.Mary Synthia RegisPrabha,A.R.Gayathri,M.M.Shinu,M.Dhanoj, Carbon Capture, Utilization and Storage (CCUS) - The Energy source of the future, International Conference, In third international conference on Intelligent Computing Instrumentation and Control Technologies , Vimal Jyothi Engineering College, Kannur,Kerala,India
44 • Nisha.P,A.R.Gayathri,Sudhagar G, Rescheduling based congestion management using particle swarm optimization strategy, International Conference, International Conference , Jyothi Engineering College,Thirussur,India
45 V.S SREE KUMARA GANAPATHY, S.INDIRA AND P.SONY, Experimental Investigation on Concrete using Animal bones as Partial replacement of coarse aggregate in addition of alccofine as an admixture , National Conference, Recent Advances in Construction Materials and Strucrures , PSG COLLEGE OF TECHNOLOGY
46 Mrs.Subitha.V,Dr.M.Supriya,Mrs.J.Sunanthini, Efficient Age Estimation using Face-Based Dynamic Patch Fusion, International Conference, First International Conference on "Recent Trends in Engineering,Technology and Management", Stella Mary's College of Engineering
47 , Sliding Mode Controlled and Phase-Shift Switched Capacitor based Multiport Converter, International Conference,
48 Dr R Rema, Sony P, Recycling factors in the implementation of Construction and Demolition Wate Management: An Empirical Study, National Conference, Multidiciplinary Research Perspective and Technological Advancements in Digital India, Manavilai, Kanyakumari District
49 Senthilkumr C, A. Selva Reegan, C. Bastin Rogers, A Secure Authentication and Data Sharing in Medical Data for Wireless Sensor Networks Based on Block Chain Technology, International Conference, , Bethlahem Institute of Engineering
50 Dr R Manju, Mr. Sreekumara Ganapathy V S, Mrs. Indira S, Mrs. Sony P, Experimental Investigation on Concrete Using Animal Bones as a Partial Replacement of Coarse Aggregatein Addition to Alccofine as an Admixture, National Conference, Recent Advances in Construction Materials and Structures, Coimbatore

# Title of Patent Filing Date Patent Status
1 AI-Assisted Predictive Maintenance System for Renewable Energy Plants 19-07-2026 Applied
2 Processing and Characterization of Mg-Sr-Zr Alloy with varying Yttrium Addition 25-12-2025 Granted
3 HANDS-FREE WHEELCHAIR CONTROL SYSTEM WITH BRAIN-COMPUTER INTERFACE FOR QUADRIPLEGIC INDIVIDUALS 18-09-2025 Granted
4 SOCIAL MEDIA INTEGRATED BANKING OFFERS PLATFORMS 14-02-2025 Granted
5 Synthesis,Fabrication,and Mechanical characterization of glass fiber reienforced Epoxy composites with silicon carbide fillers 24-11-2024 Applied
6 Advancements and challenges in additive manufacturing of 3D printed polymer composites : materials processes a direction 15-09-2024 Applied
7 Friction stir welding and processing of magnesium -Based alloy : enhancing mechanical properties and microstructure evolution for industrial application 05-09-2024 Applied
8 A comparative experimental study on damping properties of epoxy nanocomposites beans reienforced with carbon nano tubes and graphene nanoplatelets 23-08-2024 Applied
9 Precision Farming System Using AI-powered Crop Monitoring 23-08-2024 Applied
10 Optimization of welding parameters of AISI 431 and ASI 1020 joints joined by friction welding using taughi method 16-08-2024 Applied
11 Solar Panel Energy Generation Monitoring Device 10-08-2024 Granted
12 Assesing thermal properties of multipass weld beads using active thermography : microstructural variations and anisotrophy analysis 09-08-2024 Applied
13 IOT Based Portable Solar Powered Charger for Electronic Devices 10-07-2024 Granted
14 Air Purifier Face Mask 08-07-2024 Granted
15 Employee Confidence Tracking Device 19-02-2024 Granted
16 Environmental Monitoring Device 19-02-2024 Granted
17 HANDS-FREE WHEELCHAIR CONTROL SYSTEM WITH BRAIN-COMPUTER INTERFACE FOR QUADRIPLEGIC INDIVIDUALS 22-12-2023 Applied
18 Hands-free wheelchair control system with brian computer interface for quadriplegic individuals 22-12-2023 Applied
19 HANDS-FREE WHEELCHAIR CONTROL SYSTEM WITH BRAIN-COMPUTER INTERFACE FOR QUADRIPLEGIC INDIVIDUALS 22-12-2023 Applied
20 Blockchain-Based Supply Chain Management System for Sustainable Sourcing and Procurement 11-12-2023 Granted
21 AI Based Carbon Pollution Detecting Device 28-11-2023 Granted
22 Pulse Oximeter 20-10-2023 Granted
23 BREAST CANCER DETECTION DEVICE 15-10-2023 Granted
24 Optimization Planning Models Enhancement In Human Resources Health Management With Foresight 17-09-2023 Applied
25 BLOCK CHAIN BASED RESOURCE ALLOCATION IN CLOUD 11-09-2023 Applied
26 IOT ENABLED ENERGY EFFICIENT ADVANCED 6G COMMUNICATION NETWORK SYSTEM 31-05-2023 Granted
27 METHOD OF GENERATION OF ELECTRICITYBY MICROBIAL FUEL CELL AND WASTE WATER TREATMENT 26-05-2023 Applied
28 A Method For Industrial Automation Using 5G Wireless Communication Networks 05-05-2023 Granted
29 A METHOD FOR INDUSTRIAL 5G COMMUNICATION NETWORK 05-05-2023 Granted
30 DEVELOPMENT OF GEOPOLYMER CONCRETE MIXTURES THROUGH BLAST FURNACE SLAG 05-05-2023 Applied
31 SYSTEM AND METHOD FOR PLANT DISEASE DETECTION USING NEURAL NETWORKS 05-05-2023 Applied
32 MWCNT Hybrid Nanofluid Based Energy Efficient Heat Transfer Fluids 23-04-2023 Applied
33 MWCNT Hybrid Nanofluid Based Energy Efficient Heat Transfer Fluids Field Of The Invention 02-04-2023 Applied
34 1. Load Frequency Control Of PV Wind Hybrid system Using Chaotic Flower Pollination algorithm 12-03-2023 Applied
35 Method of Developing Caustic Soda Treated Banana Fibre Reinforced Hybrid Polymer Matrix Composite 22-02-2023 Applied
36 Method for Constant Level Voltage Float Charge Rectifier and Battery Surveillance Apparatus 22-02-2023 Applied
37 A System For Evaluating The Role Of Emotional Intelligence And Work Life Balance In Job Stress 28-12-2022 Applied
38 An IOT Based Method Of Remote Monitoring Of Building Structures 27-12-2022 Applied
39 Method on Developing Caustic Soda Treated Banana Fibre Reinforced Hybrid Polymer Matrix Composite 27-12-2022 Applied
40 UA METHOD FOR EVALUATING HUMAN RELATION MANAGEMENT SYSTEM IN AN ORGANIZATION USING SCANNER AND SMART DEVICE 27-12-2022 Applied
41 MACHINE LEARNING AND IOT BASED APPROACH FOR MONITORING AND PREDICTION OF AIR QUALITY POLLUTION 26-12-2022 Applied
42 SELF-POWERED ELECTRIC DRIVERLESS BUS 22-07-2022 Granted
43 An Efficient Management of Cloud Data using Green Cloud Computing Techniques 18-03-2022 Applied
44 An Artificial Intelligence based technique to Assist Paramedical Staff and Monitor their work 04-03-2022 Applied
45 AI based Intelligent Hybrid Power Management System for Smart City 19-01-2022 Granted
46 IoT based portable assistive device for Blind, Dumb and Deaf People using Artificial Intelligent 12-01-2022 Granted
47 Underwater robot for Ship Propeller Descaling Employing Ensemble Artificial Intelligence 10-11-2021 Applied
48 IoT and Cloud Based Intelligent Toll Gate Collection System 09-11-2021 Granted
49 Artificial Intelligence Based Engine Emission With EBP On Performance Assessment 25-08-2021 Granted
50 An Artificial Intelligence and Machine Learning Interface for Blockchain IoT Devices 05-08-2021 Granted

# Publication Details
Student journal publication records are currently not available in this dataset.

# Conference Publication Details
Student conference publication records are currently not available in this dataset.

# Title of Patent Filing Date Patent Status
Student patent records are currently not available in this dataset.

What research publications are available at Stella Mary's College of Engineering?

The Research Publications page of Stella Mary's College of Engineering, Kanyakumari, provides institutional records of scholarly and intellectual-property outputs. Available faculty records include national and international journal publications, conference publications and patents. Journal entries may include author names, paper titles, journal or transaction titles, volume, issue, ISSN and publication date, while conference records include event information and patents include filing dates and current patent status. Records are retrieved directly from the institutional research database and displayed in paginated categories.